Features :
• Shallow bottom elevator bucket for agricultural use.
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc
Using Recommendations
• Suitable for high-speed centrifugal discharge.
• Recommended minimum bucket spacing: the width of the bucket projection 'B'+50mm.
• Recommended elevator velocity ≤3.5m/s.
• Recommended a “Capacity L” as the available capacity for engineering design.
Technical Specifications :
| Model | Bucket Dimension* (mm) | Mounting Holes (mm) | Capacity (L) | |||||
| Length A | Proj. B | Depth C | PCD E | Standard Punching Holes | Hole Diameter | Distance Down D | ||
| SB1107 | 110 | 77 | 86 | 72 | 2 | 7 | 25 | 0.45 |
| SB1307 | 134 | 77 | 86 | 72 | 2 | 7 | 25 | 0.56 |
| SB1309 | 135 | 96 | 92 | 80 | 2 | 7 | 30 | 0.75 |
| SB1812 | 185 | 120 | 120 | 120 | 2 | 9 | 40 | 2 |
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.
• A direct replacement for many other international brands.
• Unique elevator bucket design with multiple patents.
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.
| Material | HDPE | Nylon 6 | UHMWPE | PU | Mild Steel | Stainless |
| Cost | 1 | 3 | 3 | 4 | 2 | 4 |
| Wear Resistance | 1 | 2 | 3 | 4 | 3 | 4 |
| Impact Resistance | 1 | 2 | 2 | 2 | 2 | 2 |
| FDA Food Approved | Yes | Yes | Yes | No | No | No |
| Max Temp℃ Continuous | 70 | 100 | 70 | 60 | 180+ | 250+ |
| Max Temp℃ Peak | 80 | 120 | 80 | 70 | 220 | 400 |
Remark : Code 1 = low 4 = high
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ . • Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved),
Non-caking and sticking, now water absorption, light weight properties.Higher cost performance products.
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.
