About TAKISAWA NT-2000 & NT-2500 SERIES
 

		ITEMS	UNIT	NT-2000	NT-2000M			NT-2500			NT-2500M
CAPACITY		Swing Over Bed	mm	320	320			320			320
		Swing Over Bed	mm	400	400			400			400
		Sd. Turning diameter	mm	230(T10) / 210(T12)	244			230(T10)/210(T12)			244
		Max. turning diameter	mm	320	280			360(T10)/320(T12)			280
		Max. turning length	mm	482	448			447			413
		Bar Capacity	mm	52(65)	52(65)			75			75
TRAVEL		X-Axis Travel	mm	180	180			200(T10			180
		Z-Axis Travel	mm	530	530			530			530
SPINDLE		Spindle Speed	Rpm	3500(4000)	3500(4000)			3,500			3,500
		Chuck Size	Inch	8”	8”			10"			10"
		Spindle Nose		A2-6	A2-6			A2-8			A2-8
		Through Hole Diameter	Mm	63(76)	63(76)			86			86
		Bearing Diameter	mm	100 (110)	100 (110)			120			120
TURRET		Type		T10(T12)	T12			T10(T12)			T12
		Turning Tool Shank	mm	25	25			25			25
		Boring Bar Shank Dia	mm	40	40			40			40
		Milling Speed	rpm	-	4000			-			4000
		Milling Shank Diameter	mm	-	ø1-ø20			-			ø1-ø20
TAILSTOCK		Tailstock Spindle Travel	mm	435	435			435			435
		Tailstock Spindle Diameter	mm	75	75			75			75
		Taper Hole Of Tailstock Spindle		MT.4	MT.4			MT.4			MT.4
		Tailstock Spindle Travel	mm	100	100			100			100
FEEDRATE		X-Axis Rapid Traverse Rate	m / min	24(15)	24(15)			24(15)			24(15)
		Z-Axis Rapid Traverse Rate	m / min	24(18)	24(18)			24(18)			24(18)
MOTOR		Spindle Drive Motor	kW	7.5/11(11/15)(15/18.5)	7.5/11(11/15)(15/18.5)			15/18.5			15/18.5
		X Axis Drive Motor	kW	1.2	1.2			1.2			1.2
		Z Axis Drive Motor	kW	2.5	2.5			2.5			2.5
		Milling Motor	kW	-	3.7/5.5			-			3.7/5.5
		Turret Index Motor	kW	1.2	1.2			1.2			1.2
SIZE		Height	mm	1,780	1,780			1,780			1,780
		Width	mm	2,195	2,195			2,195			2,195
		Depth	mm	1,505	1,505			1,505			1,505
		Weight	kg	4,300	4,300			4,400			4,400
	•Specification is subject to change without further notice.