'AKFA' PNEUMATIC ACTUATOR

Dual piston rack and pinion design of symmetric structures, rapid and smooth movement, high precision, high output pourer, by simply changing
the position of the piston assembly against the direction of rotation available.
Extrusion of high quality alurnimun alloy cylinder block, by the precision machining of the inner hole and outer surface of hard anodized ( anodic
oxidation under special circurnstances4leon coating ). longer life, low friction coecient.
Integrated design, all the dual role and one role of the actuator models have the same cylinder and end caps, easily removed by installing a spring
or spring to change the mode of action.
Combined pre-safe spring group, bath in the assembly process or use on-site in both convenient and safe to install or change the number of springs.
External side of two separate adjustment screw has been installed in the valve on the actuator is precisely to facilitate. control valve open and valve
dosed position, for a full stroke adjustment when the other tow covet a longer adjustment screw oce conguration.
Multi•position indicator, on-site visual instructions, consistent with VICWIE1945. NAMUR standard slot. the output can be nstalied and all the
accessories, such as limit switch box, electric posltioner, position sensor pepper! and lucks, turck )•
Interface complies with NRMAR standard gas source can be directly mounted NUMAR standard solenoid valve.
Rack on the back of the composite bearing and piston guide ring and the output shaft hearings to prevent metal on metal friction and increasing
lubrication, so a low friction, long life,All fasteners ate stainless steel, long term corrosion resistance.
Connecting part of the new international standard ds consistent with ISO5211,D1N3337 ( F03-F25 ) makes products with interchangeable, versatile.