The Limes hardness monitoring devices enable cost-effective monitoring of reverse osmosis systems with reliable chemical analysis
- Reliable and accurate monitoring of water hardness using a laboratory-calibrated indicator.
- Monitoring of a defined limit value determined by the LHV indicator used.
- No delayed response behavior compared to a swelling resin sensor.
- No calibration and no drift effects compared to an electrode measurement.
- No wear or regeneration of the sensor necessary.
- Separate connection cables for power supply, relay and input contact.
- Status display with four LEDs for limit value compliance, analysis status, device status and pending service.
Product information LIMESPLUS
- LED status display
- language-neutral
- First value suppression to prevent false alarms
- Flushing duration adjustable to the supply line length
- Automatic interval operation: limit value control of the system at adjustable intervals of 10, 20 or 30 minutes
- Connections:
- 2 potential-free outputs:
- Limit value exceeded
- Device fault
- Input contact for potential-free switch
- External analysis start
- Pausing the internal interval using a flow switch
- 2 potential-free outputs:
- Diagnostic program for testing the assemblies
