PE-GRP 200/400 series is a micro processor programmable user friendly control panel with a digital ammeter, voltmeter and a countdown timer displayed on the front panel. Count down timer is pre-set for 30 seconds upon two (2) activated zone. Timer can be program to required specification. Built-in power pack with an intelligent charger which allow to charge up a set of complete flat 24 volts battery and automatically cuts off charging once battery fully charge.

SPECIFICATION

No. of Zones Model No. Part No. Size (mm) (W x D x H) Indoor Outdoor 2 PE-GRP 200i / PE-GRP 200s FAP-02ZCP-N 430 x 370 x 170 430 x 380 x 170 4 PE-GRP 400i PE-GRP 400s FAP-04ZCP-N 550 x 390 x 170 550 x 400 x 170 TECHNICAL DATA Power Supply Input 240V AC 50Hz/60Hz Operating System 24V DC Operating Battery 18-27.6V DC Battery Cut Off 18V Intelligent Charger (S1) 0.67A – 1.3A @ 30% Intelligent Charger (S5) 1.2A – 1.8A @ 100% End of Line 8K2 Ohms Auxiliary Output 24V, 2 Amp Alarm Signal N/O Contact Gas Discharged Signal N/O Contact STANDBY MODE Master 75mA Per zone (with Detectors) 5mA Flashing Lights (Green LED) 75mA ALARM MODE Master 140mA Per Trigger Zone 70mA Output Devices 200mA Flashing Lights (Red LED) 75mA Per Bell 30mA