Description
Clamping modules or compensation modules used as an interface to the workpiece. The clamping modules can be actuated pneumatically or manually. The compensation modules serve to compensate for fine height differences.Advantages – Your benefits
Compensation of height differences up to 11 mmCustomized adjustment to the respective clamping task
Scope-free pin centering between components
High repeat accuracy of < 0.005 mm
Intelligent clamping connection between the stacking modules
For simple and quick operation
High pull-down forces
Up to 25 kN for high cutting parameters and greater production efficiency
Turbo integrated by default
Pull-down force increased by up to 300% for optimum use of the machine´s performance, hence high efficiency
Form-fit, self-retained locking
Full pull-down force is maintained even in the event of a pressure drop
Corrosion-free stainless steel design
Long life time and maximum process reliability
Options and special information
WDP-5X-DSM 99-70Pneumatically actuated direct clamping module with high pull-down forces. The workpiece is clamped via spring force in a self-locking and form-fit fashion.
WDP-5X-DSM 99-70-M
Manually actuated direct clamping module with a high pull-down force. The workpiece direct clamping takes place via a rotary movement of an actuating screw, is form-fit and self-locking.
WDP-5X-ASM 99-70-Ø36
Pneumatically actuated compensation module with a high holding force. The compensation module can freely compensate for height differences of up to 11 mm. The workpiece is clamped via spring force in a self-locking and form-fit fashion.
BR 27682 
US 10774 
MY 3952 
AR 3459 
AO 2717 
CN 2389 
DE 2037 
EC 1722 
