Festo MHE2-MS1H-3/2G-M7 Solenoid Valve Malaysia

Technical Data

• Valve function3/2-way, closed, monostable
• Type of actuationElectric
• Construction width10 mm
• Standard nominal flow rate (standardised to DIN 1343)100 l/min
• pneumatic working portM7
• Operating voltage24V DC
• Operating pressure-0.09 MPa ... 0.8 MPa
• Operating pressure-0.9 bar ... 8 bar
• Operating pressure-13.05 psi ... 116 psi
• DesignPressure-relieved poppet valve
• Type of resetMechanical spring
• Degree of protectionIP55
• ApprovalRCM trademark c UL us - Recognized (OL)
• CE mark (see declaration of conformity)To EU EMC Directive In accordance with EU RoHS Directive
• UKCA marking (see declaration of conformity)To UK instructions for EMC To UK RoHS instructions
• Nominal size2 mm
• Grid dimension14 mm
• Note on grid dimensionMinimum distance between the valves is 4 mm
• Exhaust-air functionWith flow control option
• Sealing principleSoft
• Mounting positionoptional
• Manual overrideNon-detenting
• Type of pilotingDirect
• Flow directionReversible with restrictions
• Symbol00991308
• lapUnderlap
• Reverse polarity protectionBipolar
• Additional functionsSpark arresting Holding current reduction Protective circuit
• Operating pressure, reversible-0.09 MPa ... 0.1 MPa
• Operating pressure, reversible-0.9 bar ... 1 bar
• Operating pressure, reversible-13.05 psi ... 14.5 psi
• Max. switching frequency330 Hz
• Switching time off2 ms
• Switching time on1.7 ms
• Tolerance switching time off+10%/-30%
• Tolerance switching time on+10%/-30%
• Switching time dispersion from 1 Hz0.2 ms
• Duty cycle100%
• Characteristic coil data24 V DC: low-current phase 1.25 W, high-current phase 5.0 W
• Permissible voltage fluctuations+/- 10 %
• Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
• Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
• Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
• Restrictions for environmental and media temperatureAs a function of switching frequency (see graph)
• Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
• Corrosion resistance class CRC2 - Moderate corrosion stress
• LABS (PWIS) conformityVDMA24364-B1/B2-L
• Cleanroom suitability, measured according to ISO 14644-14Class 6 according to ISO 14644-1
• Media temperature-5 °C ... 60 °C
• Ambient temperature-5 °C ... 60 °C
• Product weight60 g
• Electrical connectionCable
• Cable length2.5 m
• Type of mountingWith through-hole
• Pneumatic connection, port 1M7
• Pneumatic connection, port 2M7
• Pneumatic connection, port 3M7
• Note on materialsRoHS-compliant
• Material sealsHNBR NBR
• Material housingDie-cast zinc, coated
• Material cable sheathPUR
• Material screwsGalvanised steel