| Spec： | To measure the winding density (hardness) of textile bobbins, beams, spools, cones, dye packages etc. |
| Model： | HT-6510T-2.5 |
Features
* Convertible probe, the curved end of the probe is used for the bobbin with a diameter less than or equal to 400mm, and the flat end of the probe is suitable for the bobbin with a diameter greater than 400mm.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use USB data output to connect with PC.
* Provide Bluetooth data output choice.
Principle
The principle used to measure textile hardness is based on measuring the resistance force of the penetration of a ball against the spool under a known spring load. The measuring principle is the same as for the Shore A hardness test.
US 10431 
GB 8063 
CA 7394 
AU 6838 
IE 4850 
BR 1334 
CN 985 
NZ 733 
