IMITOS 36W 12V LED Driver GMR 36W-12V Power Supply
The IMITOS LED Driver 36W (Model: GMR 36W-12V) is a high-performance, constant voltage power supply engineered to handle the typical electrical fluctuations of the Malaysian power grid. Delivering a stable 3A/12V output from a wide input range of 175-265V, this ultra-slim (130 × 32 × 22mm) electronic transformer provides flicker-free performance and superior heat dissipation. It is the ultimate choice for running 12V LED strip lights, under-cabinet lighting, and architectural plaster ceiling layouts across residential and commercial properties in Malaysia.
Full Description:
Living and working in Malaysia means your electronics must withstand frequent voltage spikes, dips, and tropical lightning-induced fluctuations. The IMITOS GMR 36W-12V is engineered to effortlessly manage an input voltage range of 175-265V~50/60Hz. This ensures seamless compatibility with standard local TNB residential and commercial power lines. Whether you are retrofitting office light tracks in Kuala Lumpur or updating home decorative lighting in Selangor, this unit safeguards your expensive LED fixtures from unexpected thermal overloads.
Precision Output for 12V Lighting Systems
Cheaper, generic power bricks often suffer from unstable voltage regulation, causing your lights to micro-flicker—a major source of eye strain, headaches, and premature bulb failure. The IMITOS 36W driver delivers a precise, ultra-stable output of 3A at 12V DC. This exact constant voltage profile makes it the go-to match for a broad spectrum of 12V LED applications, including:
Cheaper, generic power bricks often suffer from unstable voltage regulation, causing your lights to micro-flicker—a major source of eye strain, headaches, and premature bulb failure. The IMITOS 36W driver delivers a precise, ultra-stable output of 3A at 12V DC. This exact constant voltage profile makes it the go-to match for a broad spectrum of 12V LED applications, including:
-
High-density COB and SMD LED strip lights
-
Kitchen under-cabinet puck lights
-
Display cabinet lighting spotlights
-
Slimline linear architectural profiles
Ultra-Slim, Space-Saving Profile
Bulky transformers can ruin clean, modern interior aesthetics. Understanding the requirements of modern interior designers and plaster ceiling contractors in Malaysia, IMITOS designed the GMR 36W-12V with an exceptionally compact form factor. Measuring just 130mm in length, 32mm in width, and 22mm in height, its low-profile casing slides effortlessly into tight ceiling voids, minimalist aluminum profiles, and behind narrow cabinet lips.
Premium Safety and Long Lifespan
Safety is paramount with internal electrical hardware. The IMITOS 36W transformer features an integrated smart protection suite covering over-voltage protection, short-circuit containment, and automated thermal cut-offs.
Specification:
-
Model: GMR 36W-12V
- Rate Power: 36W
- Input Voltage: 175-265V~50/60Hz
- Output Voltage: 3A/12V
- Size: 130*32*22mm
A: LED flickering in Malaysia is usually caused by an unstable or deteriorating power transformer that cannot handle incoming current fluctuations. Replacing your old power brick with a premium constant voltage unit like the IMITOS GMR 36W-12V ensures a rock-solid, flicker-free 12V output, restoring your lights to full, stable brightness.
Q2: Can I use a 36W LED driver to power a 30W LED strip light?
A: Yes, absolutely. It is highly recommended to follow the "80% rule" for power supplies.
Q3: What does the 3A output on the IMITOS GMR 36W-12V mean for my lighting setup?
A:The 3A (3 Amperes) signifies the maximum electrical current the driver can safely supply at 12 Volts. By multiplying 12V × 3A, you get the maximum total power capacity of 36 Watts, letting you know exactly how many meters of LED strips you can connect.
Q4: Is the IMITOS 36W LED Driver suitable for standard Malaysian home wiring?
A: Yes. It is fully optimized for Malaysia's domestic grid. With an input tolerance of 175-265V AC at 50/60Hz, it easily absorbs standard voltage spikes and runs smoothly on local residential power systems.
Q5: How many meters of 12V LED strip light can I run on this 36W driver?
A:This depends on the wattage consumption per meter of your specific strip. For example, if your 12V LED strip consumes 6W per meter, this 36W driver can easily power up to 5 meters of lighting safely (30W total load, leaving a healthy buffer).
Q6: Can I hide the IMITOS GMR 36W-12V driver inside a plaster ceiling partition?
A: Yes. Thanks to its ultra-compact, slim profile size of just 130 × 32 × 22mm, it is specifically designed to fit into narrow plaster ceiling troughs, cove lighting voids, or electrical enclosures.
Q7: What is the difference between a constant current and a constant voltage LED driver?
A: Constant current drivers vary voltage to keep current stable (usually for downlights), whereas constant voltage drivers like the IMITOS GMR 36W-12V keep the voltage locked (at 12V) while current varies. Constant voltage units are the standard power supply style for LED strip lights and light bars.
Q8: Does this IMITOS 12V driver support smart dimming switches?
A: The standard IMITOS GMR 36W-12V is a non-dimmable constant voltage power supply. If you wish to dim your lights, you will need to install an external 12V dimming controller receiver (like a Tuya Zigbee/Wi-Fi dimmer) on the output line after the driver.
Q9: What happens if I accidentally connect a 24V LED strip to this 12V driver?
A: A 24V LED strip requires 24V to light up efficiently. If connected to this 12V output driver, the strip will either emit very faint light or fail to illuminate entirely due to under-voltage, though it will not damage the driver itself.
Q10: Where can I buy authentic IMITOS LED drivers with safety assurance in Malaysia?
A: Authentic IMITOS lighting accessories and electronic drivers can be sourced via authorized electrical wholesalers in KL/Selangor or purchased online through verified e-commerce lighting stores on platforms like Shopee and Lazada Malaysia.
