LAST UNIT OFFER!!!
Overview
Rail Bull is suitable for work in both horizontal and vertical positions
The Rail Bull welding carriage is supplied in a metal box including:
- welding carriage
- metal box
- cross slide assembly
- short rod torch holder with clamp
- cable anchor power cord 3 m (10 ft)
- arc ignition cable of 6.5 m (21 ft) 3 mm hex wrench
- 4 mm hex wrench
- operator’s manual
Specification
| Voltage | 1~ 115–230 V ; 50–60 Hz |
| Power | 100 W |
| Welding positions – Horizontal | PA (flat) & PB (horizontal vertical) & PC (horizontal) |
| Welding positions – Vertical | PF (vertical up) & PG (vertical down) |
| Minimum track curvature radius | 5 m (16 ft) |
| Torch type | MIG/MAG |
| Torch diameter | 16–22 mm (0.63–0.87’’); up to 35mm (1.38”) option |
| Minimum workpiece thickness | 5 mm (0.20’’) |
| Horizontal pulling force | 350 N |
| Vertical pulling force | 150 N |
| Cross slide adjustment range | 0–35 mm (0–1.38’’) up-down & left-right |
| Horizontal speed | 0–120 cm/min (0–47.2 in/min) |
| Vertical speed | 0–110 cm/min (0–43.3 in/min) |
| Oscillation type | linear |
| Oscillation path | trapezoid ; triangle ; straight line |
| Oscillator arm stroke | 0–100 mm (0–3.9’’) |
| Oscillation width | 0–50 mm (0–1.9’’) |
| Oscillation speed | 0–1500 mm/min (0–59.0 in/min) |
| Oscillation delay at center and on ends | 0–5 s |
| Maximum oscillator pulling force | 100 N |
| Weight | 20 kg (44 lbs) |
Dimension for Rail Bull:
MY 726 
US 700 
CN 172 
AU 90 
AP 76 
CA 55 
GB 43 
SG 37 
