Alcohol (ALC) Rapid Test - Urine

【DIRECTIONS FOR CASSETTE USE】
Allow the pouched cassette to equilibrate to room temperature (15-30°C) prior to testing.
1. Remove the cassette from the sealed pouch and use it within 1 hour.Observe the reactive pad on the central window of the cassette. If the reaction pad has a blue color before applying urine sample, do not use.
2. Place the cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approximately 120μL) to thespecimen well of the cassette, and then start the timer. Avoid trapping air bubbles in the specimen well. See illustration below.
3. Read the results in 3-5 minutes. Compare the color of the reaction pad and standard color card to determine the relative blood alcohol concentration.

【STORAGE AND STABILITY FOR PANEL】
The Urine Alcohol Rapid Test Panel is to be stored at 2-30°C (36-86°F) in its sealed foil package. Bring the pouch to room temperature before opening it. Remove the test panel from the sealed pouch and use it within one hour.
1. Remove the cap.
2. With the arrow pointing toward the urine specimen, immerse the test panel vertically in the urine specimen for at least 10 to 15 seconds. Immerse the dipstick to at least the level of the wavy lines, but not above the arrow on the test panel.
3. Replace the cap and place the test panel on a non-absorbent flat surface.
4. Start the timer and wait for the results within 3-5 minutes to read. Compare the color of the reaction pad and standard than color card to determine the relative blood alcohol concentration.

【DIRECTIONS FOR DIPSTICK USE】
Allow the pouched dipstick to equilibrate to room temperature (15-30°C) prior to testing.
1. Collect the urine in the collection cup provided.
2.Open the foil package and remove the test dipstick. Observe the reactive pad on the middle of the test dipstick. If the reaction pad shows the blue color before applying urine sample, do not use.
3.Immerse the test dipstick vertically in the urine specimen for at least 15 seconds. Start timer immediately after urine application.
4.Read the result in 3-5 minutes. Compare the color of the reaction pad and standard color card to determine the relative blood alcohol concentration.