Performance Features
- Airflow capacities from 75 to 5995 m3/h
- Round inlet sizes from 4 in. through 16 in. diameter
- Galvanized steel casing construction
- Suitable for low, medium, or high pressure applications
- Linear, multiple-point, averaging velocity sensor with an amplified signal
- Damper blade has a flexible gasket for tight airflow shutoff
- Damper blade operates over a full 90 degrees
- Pressure independent, BACnet protocol is standard and Carrier Control Network (CCN) is optional
- Electronic speed control (silicon controlled rectifier [SCR] type) allows field adjustable fan airflow
- Isolated motor/blower assembly
- Electric or hot water reheat coils
- Multiple casing liners available
- Electric heat (1 to 3 stages) or proportional heat
Reliability Features
-
Heaters equipped with:
Primary automatic and secondary manual reset thermal cutout fuse and positive pressure air flow switch - Strong integral panel/post construction
Maintenance Features
- Removable bottom access panel for easy accessibility during routine inspections and maintenance
- Label information adhered to each unit includes model, size, airflow (m3/h), balancing chart, and tagging data
Installation Features
- Rectangular discharge with slip and drive connections provides quick and easy connection to downstream ductwork
- Compact unit casing accommodates installation in reduced ceiling plenum space
- Factory-installed controls
- All round collars accommodate standard spiral and flex duct sizes
- Balancing taps provided for easy airflow verification
- Single point electrical connection
Factory-Installed Options
- Electric heater
- Filter
- On/Off hot water valve
- Controls
- Control panel