Product Integrated Controller
Controller provides ability to integrate Carrier Comfort Network® (CCN) communicating controllers into BACnet MS/TP and Modbus networks.
The BACnet/Modbus Carrier Translator is a micro controller-based module that provides the ability to integrate Carrier CCN-based controllers into Modbus and BACnet networks. The BACnet/Modbus Carrier Translator (33CNTRAN485) provides CCN to Modbus Remote Terminal Unit (RTU) and BACnet Master-Slave/ Token-Passing (MS/TP) protocol conversion.
The Carrier Translator can be mounted in the controls section of any CCN equipment and converts CCNbased controller data to BACnet or Modbus. The Carrier Translator is outdoor duty rated and contains CCN RS-485 and BACnet/Modbus communications connectors.
When connected to a CCN controller, the BACnet/Modbus Carrier Translator allows a third party BACnet or Modbus device to read and write to the CCN controller’s mapped status display, time schedule, and setpoint schedule data. Note that status display write access is subject to the CCN equipment controller’s defined read/write access for each status display item.
- 3-wire removable BACnet/Modbus connector
- 3-wire fixed screw terminal CCN connector
- 2-wire fixed screw terminal Power connector
- Red Processor Status LED
- Yellow CCN Communication Status LED
- Green BACnet/Modbus Communication Status LED
| Power Requirements | 3 VA @ 24 Vac + 25% |
| Dimensions |
2.1 in H x 5 in W x 4 in D (53.3 mm x 127 mm x 101.6 mm) |
| Operating Temperature |
-40°F to 158°F (-40°C to 70°C) |
| Storage Temperature |
-40°F to 185°F (-40°C to 85°C) |
| Operating Humidity | 0 to 95%, non-condensing |
| CCN Communications | 9600, 19.2K, 38.4K baud |
| BACnet MS/TP Communications |
EIA-485 at 9600, 19.2K, 38.4K baud |
| Modbus RTU Communications |
EIA-485 at 9600, 19.2K, 38.4K baud |
| Data Bits | 8 |
| Parity | Odd, Even, None |
| Stop Bits | 0,1,2 |
| Flow Control | None, XON/XOFF |
US 16053 
GB 13455 
CA 11037 
AU 8813 
IE 6302 
NZ 3217 
BR 2988 
SG 1391 
