Steps involved in an Aircon Overhaul

• First and foremost, our AC technicians refill refrigerant gas in the lock service valve and the condensing unit. This ensures that your AC can absorb heat from the air at a rapid pace and discharge it from the system.
   
• Next, everything from drainpipe to flare jointing to fan coil unit is dismantled. Next to this is the dismantling of the fan coil unit from the wall. Once done, the electrical unit is disconnected from the fan blower, fan motor, coil, and drain pipe.
   
• Since all the key components are dismantled now, we can start cleaning them. We use soft bristle brushes to remove dust and debris from the fan and circuit board. As we do this, other technicians run their checks and tests to see if there are any signs of burns or other damage.

• It’s time to deep clean the dismantled components. We will start with the coil, fan blower, drain pipe, and fan coil front cover. They are submerged in a chemical solution to eliminate bacterial stains and dissolve the debris. We prioritize alkaline solutions over acidic because they can get the job done without causing any corrosion or damage to the sensitive parts.
   
• Before individual parts are injected with chemical solutions, they are thoroughly washed under taps. Water reacts with the chemical to form a lather
  that will take care of accumulated dust. Debris stuck within the inner parts is also adequately removed. Now, the parts are left in this condition for
  some time for stains to get weak, so they can be extricated with relative ease later on.
   
• Afterward, your AC parts are flooded with tap water to get rid of chemicals and stop them from developing stains. A clean cloth is then used to wipe
  everything and make sure the parts are dried. The fan coil unit is now ready to be reassembled.
   
• ​This is followed by vacuuming the drainpipe and connecting all the dismantled parts to their places. These include fan coil, flare joint, and electrical wires.
   
• ​During chemical cleaning Aircon refrigerant system is also cleaned using a vacuum pipe that removes any external agent. Now, it’s time to see if thereare any leakage points. If case one is found, our technicians will get onto it and fix it in no time.
   
• After all of this, we will run your AC in a final test to conclude the process and pass it through our testing.
   

The Chemical Cleaning Aircon needs