Spanjaard Electrical Insulating Varnish is a red coloured, moisture and oil resistant varnish. It is an excellent insulating medium for use in a variety of industrial applications.
Application
- For use on all electrical windings, coils and motor frames.
- Protects against arcing from controller shafts, switch bases and other electrical equipment.
- Used as a sealant for pipes, gaskets, etc.
Application Instruction
1. Thoroughly degrease the component to be treated, preferably with a safety solvent, e.g. Spanjaard Electrical Motor Cleaner and allow to dry.
2. Shake the can vigorously until agitator/ball is freed.
3. Holding the can 25cm away from the object to be treated, apply one or more thin layers of product; allowing three minutes for each coat to dry.
Typical Properties
.png)
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei | TYPICAL PROPERTIES | SPANJAARD ELECTRICAL INSULATING VARNISH |
| Specific gravity @ 25°C | 0.961 |
| Flash point, PMCC, °C (D-93) | 5 |
| Di-electric strength (IEC 156) | |
| @ 25°C, volts/mil | 1700-1900 |
| @ 25°C, KV/mm | 67-74 |
| Di-electric constant | |
| @25°C (D-150) | 2.9 – 3.4 |
| Surface resistivity, ohms/cm2 (D257) | 1x1014 |
| Volume resistivity, ohms/cm2 (D257) | 1x1014 |
| Moisture vapour transmission (E-96) | 4 – 5 |
Contact our sales consultant in area:
US 1179 
MY 374 
CN 276 
AP 120 
AU 74 
IE 36 
CA 36 
GB 30 
