Digital probe with connector ELKA.
Stainless steel mesh filter.
The probe is supplied with a calibration certificate.
The probe is interchangeable without calibration to a specific device and regardless of the length of the cable.
Optionally also available with cable of various lengths. For other cable lengths use the selector.
-
CodeDIGIL/E-5
TECHNICAL DATA
MEASURED VALUE
TemperatureRelative humidityTEMPERATURE SENSOR
Measuring range -30 to +105 °CAccuracy ±0.4 °CResponse time t90 < 6 min, temperature step 20 °C, air flow 1 m/sHUMIDITY SENSOR
Measuring range 0 to 100 % RVResponse time ±1.8 %RV in the range of 0 to 90 % RH at 23 °CResolution t90 < 9 s (humidity step 60 %RH, constant temperature)Hysteresis ±1 % RVLinearity ±1 % RVDEW POINT
Measuring range -60 to +80 °CAccuracy see the manualGENERAL TECHNICAL DATA
Operating temperature -30 to +105 °CProtection class IP40Connector ELKADimensions (without cable) 88 x 18 mmCable length 1 m, 2 m, 5 m, 10 m or 15 mWeight cca 55 gWarranty 3 years
US 939 
MY 652 
CN 132 
AU 76 
CA 68 
AP 63 
GB 54 
DE 50 
