Packing in :
1 kg (666g SLE/Clear Epoxy + 333g SLEH/Hardener)
6 kg (4kg SLE/Clear Epoxy + 2kg SLEH/Hardener)
Method apply SLE on Tiles Surface:
Step1: Use Stain Etching Remover SER roller on tiles surface, use water clean after 1 hour then let surface fully dry.
Step 2: Mixing 2380-7040 Grey Primer 500gram : Hardener 100gram, use epoxy roller apply on tiles surface. Let it 12 hours dry.
Step 3: Mixing SLE Epoxy Clear 666 gram / 4 kg : Hardener 333 gram / 2 kg : Colour Tinter 100gram, after fully stir then apply on surface 1-3 layer (depend thickness you want, wait 24 hours dry per layer).
Remark: Spray T28 Slow Thinner on surface to let Epoxy inner bubble fully gone up.
US 1139 
CN 255 
MY 106 
AP 70 
AU 50 
DE 32 
NZ 22 
CA 22 
