1) PRECISION BENCH CENTRES (STANDARD TYPE)
- Used for eccentricity and deflection Measurement of shafts, etc.
Product Description:
- Used for eccentricity and deflection Measurement of shafts, etc.
- Parallellism between table upper surface and center is assured.
- Center entry/exit is performed by one touch lever.
・According to your requirement, we can manufacture variations with carbide center or brolly center.
・Dial gauge and test bar are not included.
| Code No. | Model |
Full Lenght (Lmm) |
Center Distance (mm) |
Center Height (mm) |
Use Center |
Height Parallellism (μm) |
Weight (kg) |
| SA101 | No.-1 | 650 | 400 | 150 | MT#1 | 6 | 31 |
| SA102 | No.-2 | 1220 | 800 | 240 | MT#2 | 8 | 87 |
| SA103 | No.-3 | 1645 | 1200 | 300 | MT#3 | 10 | 135 |
2) PRECISION BENCH CENTRES (P-TYPE)
- Small sized type of standard model tester.
- Small sized type of standard model tester.
- Used for eccentricity and deflection Measurement of shafts, etc.
- Parallellism between table upper surface and center is assured.
- Center entry/exit is performed by one touch lever.
・According to your requirement, we can manufacture variations with carbide center or brolly center.
・Dial gauge and test bar are not included.
| Code No. | Model |
Full Lenght (Lmm) |
Center Distance (mm) |
Center Height (mm) |
Use Center |
Height Parallellism (μm) |
Weight (kg) |
| SAP101 | P-1 | 410 | 150 | 110 | MT#1 | 5 | 14.0 |
| SAP102 | P-2 | 470 | 200 | 15.5 | |||
| SAP103 | P-3 | 560 | 300 | 17.0 |
3) PRECISION BENCH CENTRES WITH V-BLOCK
- Tester with V Block (V Width 16mm) attached to stock.
- Tester with V Block (V Width 16mm) attached to stock.
- Can be used for measurement of shafts, etc with center hole, or without hole
- On the dial gauge stand, a lever type dial gauge is installed.
- Center entry/exit can be performed by a one touch lever.
※・Dial gauge and test bar are not included.
| Code No. | Model |
Full Lenght (Lmm) |
Center Distance (mm) |
Effective Center Height (mm) |
Use Center |
Height Parallellism (μm) |
Weight (kg) |
| SCV101 | CV-1 | 530 | 300 | 75 | MT#1 | 5 | 14 |
4) VERTICAL TYPE PRECISION BENCH CENTRES (VP-TYPE)
- Surface Plate flatness is JIS Grade 1.
- Surface Plate flatness is JIS Grade 1.
- Surface Plate is bag type, therefore long term accuracy can be manitained.
- The Stock moves up/down by gear.
- Due to balance weight within the column, it moves with minimum force.
※・According to your requirement, we can manufacture head spin type.
・Test bar is not included.
| Code No. | Model |
Measurement (L×Wmm) |
Center Distance (mm) |
Center Height (mm) |
Use Center | Center Axis Perpendicularity (μm) |
Weight (kg) |
| SVP101 | VP-1 | 600×500 | 400 | 150 | Carbide MT#2 | 5 | 230 |
| SVP102 | VP-2 | 900×600 | 700 | 200 | Carbide MT#3 | 8 | 440 |
| SVP103 | VP-3 | 1000×750 | 1000 | 240 | 12 | 550 |
US 930 
CN 148 
MY 83 
AP 52 
AU 47 
GB 26 
SG 22 
AR 21 
