XP-M1000i

1 Door IP Access Controller

• Encrypted IP

• Direct TCP/IP

• High Capacity

• Supports Up to 16 Digits
  
  
   

  Item	Features
  No. of Doors	1 Door
  No. of Readers	Max 2 Readers (Plato Readers) – 1 Entry / 1 Exit
  Wiegang / ABA Reader	Yes – Max 2
  Connection to PC	IP LAN (10/100 Base-T) / RS485
  Connection to Readers	RS485 – Plato Reader Series / Wiegand/ABA
  Card Holders	10,000 (16 Digits)
  Transactions	50,000
  Time Setting	255 Time Sets / 255 Time Zone (No Access Level Limits)
  Holiday	30 (2 sets)
  Inputs	5 Supervised/Digital (Switchable) – 1 Door Sensor + 1 Exit Button, 1 Dedicated Fire Alarm Input, 2 Configurable as Reader Tamper, Emergency Breakglass Monitor or General Purpose
  Door Relay Output(s)	1
  Extra Relay Output(s)	Yes (1) – Configurable
  Encrypted IP	Yes – AES 128
  Global Anti-Passback	Yes – Use SNet-GAC
  Real Time Clock	Yes – with On Board Battery
  WAN Support	Yes – Support Dynamic IP
  Power Fail Monitor	Yes – with Power Level Monitoring
  Firmware Upgrade	Download from Software
  Diagnostic	Yes – Using Built in Web Browser
  Onboard LED Indicators	Yes– Input, Output, Run, Diagnostic
  Onboard Buzzer	Yes
  Use with other MicroEngine controllers	Yes
  Processor	Microchip PIC32 – 32 bit RISC MCU at 80 MHz
  Memory	Program (FLASH: 512KB); DATA (EEPROM: 128KB, FLASH: 4MB)
  PCB Board Dimension	160mm (L) x 80mm (W)
  Casing Dimension	235mm (H) x 227mm (W) x 75mm (D)
  Power Consumption	Typically 400mA (Controller board only)