Expansion module EXT016S is used for making SECOLINK PAS series control panels compatible with SECOLINK BK, BP, BT series wireless detectors. EXT116S has 1 built-in relay that act as PGM in the system. The module is compatible with LT5 remote control unit. LT5 can be used to arm/disarm alarm system, operate PGM outputs.
Features | EXT116S |
---|---|
Description | Long range wireless module |
Product type | Alarm system module |
Maximum cards (transponder/tag) | 16 |
Receiver radio frequency | 868 Mhz |
Distance between receiver and detector in open area | Uo to 500m |
Distance between receiver and detector in building | Uo to 100m |
Compatible remote control unit | LT5 |
Data bus protocol | KRBUS |
Zone loop (detector) type | 1-8 zones NO/DEOL, 9-16 zones NC Vibration |
Maximum wiring distance to CP | 300 m |
Power supply | 9 - 14 V |
Current consumption | ≤70 mA |
Compatibility with detectors | BK1, BK3, BK4, BT1, BP1 |
Overall dimensions W x H in mm | 67 x 50 |
Environmental compliance | ROHS |
Operating temperature | From -10oC to +50oC |
Interface for module firmware updating | USB |