LS M100 Series AC Inverter for 0.1kW (0.125HP) 230V 3 Ph motor in VxF control to 0.8A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Output Current: 0.8A
Overload: 150% x 60 seconds every 10 minutes
Size 1: 85mm Wide x 100mm Deep x 145mm High. IP20.
Weight: 0.66kg.
Speed Control Range: 0-400Hz
Braking: Not Available.
Fixed 7 Segment Keypad with Speed Potentiometer
1 Analogue Input, 3 Digital Inputs, 1 Analogue Output, 1 Digital Output, 1 Relay Contact set
RJ45 port for remote keypad, see linked products below.
Input Current: 1A
Input Voltage: 200-240Vac Single Phase +10%, -15% at 50-60Hz
EMC Compliance: IEC EN61800-3 Category C2 (restricted Domestic). Filters can be disabled with the addition of a plastic washer (provided).
Cubicle mount.
Rated Ambient: 40°C
Ventilation space above and below: 100mm, 50mm at sides (single unit): 50mm at front
Heat Loss at max output: Not Given
Mounting via 35mm DIN rail or 4 x holes at rear for 4.5mm screws on 75mm x 135mm centres.
Manufacturer part number is LSLV-0001-M100-1EOFNS (LSLV0001M100-1EOFNS)
Manufacturer recommends that this should replace previous generation iC5
US 23845 
BR 22304 
GB 12293 
CA 8772 
AU 7288 
IN 5502 
IE 4976 
BD 3199 
