Voltage	6 & 12 V DC
Operating Temperature	0–120 °F (-18–49 °C)
Replacement Cord Assembly	EECTCORD402USB
Replacement LED and Spring Assembly	EECT402USB-LCD
Computer Safe	Yes, <10 mA (Do not use on airbags)
Replacement Clip	NA (USB Plug included on replacement cord)
Red LED	Power Connection Indicator
Handle Size/Color	Medium Instinct®/Clear
Terminal End	USB Plug (EECT402USB-1, 12 V CLA adaptor included)
Polarity	Bi-Directional with Color LED, Red and Green indicators
Green LED	Ground Connection Indicator
Cord Type	Coiled Flexible Rubber
Country Of Origin	KOR
Warranty	1 Year (field repairable)
Surge Protected	Surge and high DC voltage
Resolution	0.1 V DC
Accuracy	±0.3 Volt
Outside Wire Diameter, inches (mm)	.3 (7.6)
Cord Color	Black
Weight, lb (kg)	0.5 (0.22)
Overall Handle and Shank Length, inches (cm)	8-1/4 (20.9)
Range	0–19.9 V DC
Stainless Steel Shank Length, inches (cm)	3-1/2 (8.9)
Cord Length, ft (m) – gauge	13 (3.6) – 18
Display	LCD w/Backlight

Features

• Detects DC voltage on newer autos, trucks, motorcycles and more with a USB port
• 0-19.9 V DC range
• USB plug allows measurement of DC voltage, ground and open circuits without changing polarity
• No clamp connection to vehicle battery for quicker diagnosis
• Backlit daylight readable LCD digital display has LED illumination in green for ground or red for power
• Leaves one hand free to jiggle a wire, replace a fuse or operate a switch
• 3-1/2'' stainless steel corrosion free shank
• Patented Instinct® clear handle for visibility, style and comfort
• Traditional 12 V CLA adaptor is included for older vehicles (EECT402USB-1)
• 18 Gauge coil cord stretches to 13'
• START: Insert the plug end into the vehicles USB port
• OPEN: White backlight will turn on, the red and green LED’s flash, display will read 0.0 V—red and green lights continue to flash until a good ground or voltage reading at the tip is found
• POWER: Touch the probe to a terminal, wire or switch, the Red LED illuminates and the LCD will display the measured circuit voltage
• GROUND: Touch the probe to a terminal, wire or chassis, the Green LED illuminates and the LCD will display “gnd.v” for an acceptable ground or a reading for an unacceptable ground
• Technical Support 888-382-6522