Water Cooled Xenon Lamp Weather-Resistant Testing Machine X-SUN-500
Model:  X-SUN-500

Equipment Summary:
Xenon lamp aging testing machine is a comprehensive climate testing machine, in addition to  climatic  aging  test,  the  light  fastness  of  materials  can  be  carried  out  to  test,  polymer materials  exposed  at  simulated  sunlight.  It  simulates  the  light,  temperature,  rainfall, condensing,  humidity  to  test  the  materials;  it  can  be  used  for  choosing  new  materials, improving existing materials, or assessment of change in material composition;

Main Functions:
Make  the  samples  exposed  to  the  high  temperature  and  alternating  back  to  the  circle  of light and moisture environment to test the materials. This machine use water cooled xenon lamp tube to simulate the sunlight radiation, and use condensation water and spray water to simulate the  dew  and  rain.  This  instrument  only  use  a  few  days  or  weeks’  time,  to realize  the  condition  or  the  parts  aging  damage  state  in  outside  environment  in  few months   or   years.   Including   fade,   colour   change,   fracture,   crack,   wrinkle,   foaming, embrittlement, strength reduction, oxidization and so on.

Corresponding Standard:

Standard:	Description
GB12831-86	Vulcanized   rubber   artificial   climate   (xenon   lamp)   Aging   Test Method
GB/T1644.2-1999	Plastics laboratory light exposure test method
GB/T8427-89	Textile colour  fastness  test,  resistance  to  artificial  light  fastness xenon arc
GB/T8430-98	Textile colour fastness test, resistance to artificial light fastness xenon arc
GB/T1865-97	Paints, varnishes, artificial weather aging and artificial radiation exposure
GB/T16991-97	Textile colour fastness test
GB/T5137.3-96	Simulated climate test method of resistant to radiation, heat, humidity, burning
GB/T16259-96	Colour building materials, artificial climate accelerated aging test method
GB/T2423.24-95	Electronic and Electrical Products Environmental Testing Part II: test method, testing SQ: Simulation of solar radiation on the ground
ASTM G155-05a	Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

 
 
 Technical Parameter:

Model		X-SUN-500
Testing Chamber Size D×W×H		800*800*800mm
Index	Temperature range	RT+10℃~70℃
	Humidity range	40～98%R・H
	Rainfall Duration	1～9999min, adjustable
	Rainfall Cycle	1-240min, interval adjustable
	Irradiance	290nm～800nm（500-1120 W/m2) ; Accuracy: ≤±0.05 W/m2
	Light source	Xenon Lamp (water-cooled type)
	Xenon lamp power	6.5kw (longevity：1000H)
Temperature and humidity control	Rotating Base	Angular Speed: 360°/min; Speed: 1-3 RPM
	Number of Specimens	42 pieces of (W)75x(L)150mm
	Diameter of Rack	600mm
	Time controller	Import controller from Moeller
	Accurate range	Temperature: ±0.1℃、/ humidity: ±0.1 R・H
	Water Spray System	Spray Duration	1 ~ 999min adjustable
		Nozzle Diameter	Φ8mm
		Spray Pressure	0.12 ~ 0.15 Mpa
		Spray Time Setting	18min/ 102min or 12min/48min
	Temp. & Humidity Sensor	Platinum resistance Pt100Ω/mv
	Heating system	Independent system, nickel chromium alloy electric heating type heater.
	Humidity system	stainless steel, external Isolated humidifier
	Blackboard temperature	Bimetal thermometer blackboard 55℃~75℃
	Water supply	Humidification water supply with automatic control, xenon lamp cooled by water recycling
	Temperature controller	Import controller
	Humidity	Irradiation: 30%~65%RH darkly: up to 90%RH
	Cycle system	Low-noise air-conditioning-type motors, multi-leaf-type centrifugal wind wheel
Material	Outside material	Advanced spray colour plate /SUS304 stainless steel
	Inside material	SUS304 stainless steel
	Sample holder material	SUS304 stainless steel
	Insulation	High and low temperature aging of silicone rubber