Crush Tester (ring crush, edge crush, flat crush, plybond adhesion) RCT ECT FCT Tester
Model: YSD-01
 
Crush Tester(ring crush, edge crush, flat crush, plybond adhesion) is used for the ring crush(RCT) for paper with thickness between 0.15 and 1mm, edge crush(ECT), plybond adhesion (PAT) and flat crush(FCT) test for board. It can also be used for the compression test (CMT) for tube with diameter less than 60mm.
 
Crush Tester (ring crush, edge crush, flat crush, plybond adhesion) Features:

1. Four test modes of RCT, ECT, FCT and PAT available
2. Microcomputer control, auto measuring and intelligent test result judgment, auto returning.
3. Real time display of curve, data auto collecting, calculating, analysis, storage and printing.
4. LCD display, PVC operation manual
5. Synchronous motor drive for precise pressure output.

 
Crush Tester (ring crush, edge crush, flat crush, plybond adhesion) Technical Data:
 

Test range	:	5 - 3000N
Accuracy	:	≤±1%
Resolution	:	0.01N
Platen parallelism	:	≤0.05mm
Upper platen diameter	:	125mm
Lower platen diameter	:	125mm
Compression speed	:	12.5±1mm/min
Stroke	:	80mm

 
Crush Tester (ring crush, edge crush, flat crush, plybond adhesion) Standard:
ISO 12192, ISO 3035, ISO 3037, ISO 7263, GB/T2679.6, GB/T6546, GB/T2679.8, GB/T6548
 
We are a professional manufacturer of instruments and devices, covering testing instruments, PLC, and customer-made machinery.
We have a few lines of material testing instruments

1. Plastic film, bag, polymer testing
2. Paper and board testing
3. Bottle and container testing
4. Medical packaging testing
5. Other customized