ELCO Fan Motor (5W/10W/18W/25W/34W)
THE PRODUCT
N - M58 - CN SHADED POLE MOTORS The Shaded Pole motors of the N Series are widely used in the industrial and commercial refrigeration, in the condensing and evaporating units and in small ventilating units. These motors are 4 shaded poles, single phase, running at a nominal tension of 230V, 50-60 Hz, with an output power ranging from 5 to 34 Watt; insulation class B and protection class IP40.
GENERAL FEATURES
The new range of shaded pole motors is the result of more than 50 years’ experience of ELCO® as world leader not only for the sales volumes, but also for know how, research and development. All products are strongly innovative as ELCO® wants to answer the request of the market asking for new technologies.
MATERIALS
All products are realised with components that are strictly selected among the best possible suppliers and every component is severely tested as requested by European standards. End-shields are in aluminium. ELCO® has also developed a fan blades range in thermoplastic material. This material reduces the deformation of the blade and improves the dimensional stability, granting at the same time its shape and the correct balancing.
MOUNTING
The motors are suitable for horizontal and vertical mounting.
DIRECTION OF ROTATION
CCW viewed from shaft side.
PERFORMANCES
Standard version runs at 230 V, 50-60 Hz; other solutions are available on request.
AMBIENT TEMPERATURE
-40°C +40°C; we use a special lubricant whose characteristics are better than those of the previous lubricants.
N - M58 - CN SHADED POLE MOTORS The Shaded Pole motors of the N Series are widely used in the industrial and commercial refrigeration, in the condensing and evaporating units and in small ventilating units. These motors are 4 shaded poles, single phase, running at a nominal tension of 230V, 50-60 Hz, with an output power ranging from 5 to 34 Watt; insulation class B and protection class IP40.
GENERAL FEATURES
The new range of shaded pole motors is the result of more than 50 years’ experience of ELCO® as world leader not only for the sales volumes, but also for know how, research and development. All products are strongly innovative as ELCO® wants to answer the request of the market asking for new technologies.
MATERIALS
All products are realised with components that are strictly selected among the best possible suppliers and every component is severely tested as requested by European standards. End-shields are in aluminium. ELCO® has also developed a fan blades range in thermoplastic material. This material reduces the deformation of the blade and improves the dimensional stability, granting at the same time its shape and the correct balancing.
MOUNTING
The motors are suitable for horizontal and vertical mounting.
DIRECTION OF ROTATION
CCW viewed from shaft side.
PERFORMANCES
Standard version runs at 230 V, 50-60 Hz; other solutions are available on request.
AMBIENT TEMPERATURE
-40°C +40°C; we use a special lubricant whose characteristics are better than those of the previous lubricants.
MY 1555 
US 974 
CN 229 
AP 89 
AU 58 
SG 43 
DE 38 
CA 38 
