EM101N

EV Oscilloscope & Multimeter

FEATURES

Combined with the characteristics of dual-channel oscilloscope and multimeter.
The anti-fall rubber sleeve increases the protection of the product, and the unique fuse plug-in design is convenient for replacement.
With X-431 diagnostic tool, it can be connected wirelessly or in wired mode, which can be freely selected.
With X-431 diagnostic tool, the new UI design supports three display modes, which can be freely switched.
Needle sets, multimeter pens, alligator clips, oscilloscope channel test leads, etc. are all available.

SPECIFICATION

DC Voltage	Automatic range, test range: ±600V
AC Voltage	Automatic range, test range: ±600V
DC Current	Automatic range, test range: ±10A (It is necessary to connect an external sensor for large range current.)
AC Current	Automatic range, test range: ±10A. Average value measurement (It is necessary to connect an external sensor for large range current.)
Resistance	Automatic range, test range: 0~6MΩ
On and off	Tweet when less than 30Ω
Diode	0.5V—2.0V
Battery Capacity	3100mAh
Bandwidth	10MHz
Channel	Two analog channels
Real-time Sampling Rate (Max)	50MHz/s
Time Base Range	1us/div～10s/div, step by 1～2～5 times
Sampling Mode	Normal sampling, peak detection, average
Buffer Memory	1M
Input Coupling	DC, AC, grounded
Input Resistance	1MΩ±2%, Parallel with 15pF±5pF
Vertical Sensitivity	2mV/div～5V/div
Vertical Resolution	8bits
Maximum Input Voltage	40V peak value（DC + AC peak value）
Probe Attenuation Factor	1X, 10X, 100X（probe support required)
Trigger Type	Edge trigger, pulse width trigger
Trigger Mode	Auto, Normal, Single
Automatic Measurement	Peak-to-peak value, Average value, Maximum value, Minimum value, Top value, Bottom value, Frequency, Period