GL7-DCO specification
| Item | Description | |
|---|---|---|
| Type of module | Analog voltage output module | |
| Model number | GL7-DCO | |
| Number of output channels | 8 channels | |
| Output connector | SMA (Sub-miniature version A) connector | |
| Output method | All channels common ground, SMA (Sub-miniature version A) connector | |
| Sampling speed (interval) | Up to 100 k Samples/s (10 μs) | |
| Output condition | Source of data | Measurement data, Edited measurement data, Generated arbitrary data (*1), Generated simple waveform (DC voltage and sine, triangle, ramp, pulse waveform) |
| Source of measurement data | Module of Voltage (GL7-V), Voltage/Temperature (GL7-M), High speed voltage (GL7-HSV), High voltage (GL7-HV), DC strain (GL7-DCB), and Charge (GL7-CHA) | |
| Output condition | Signal can be measured by the input module even while the signal is output from the DCO module. Measurement data except the temperature, humidity and logic/pulse are able to output. | |
| Output range | Voltage | ± 1, 2, 5, 10 V Full Scale |
| Current | Up to ± 10 mA in each channel (total output current of unit is up to 40 mA.) | |
| Output impedance | Max. 1 Ω | |
| Output signal accuracy (*2) | ±0.25% of Full Scale | |
| D/A converter | Resolution 16 bits (effective resolution: 1/20000 of the output full range) | |
| Filter | Low pass |
OFF, Line(1.5 Hz), 5, 50, 500, 5k, 50k Hz * This filter is the smoothing filter to remove the noise on output of the D/A converter. |
| External dimensions (W x D x H) | Approx. 49 x 136 x 160mm (Excluding projections) | |
| Weight | Approx. 770g | |
