雪兰莪,吉隆玻,新加坡太平洋无线电（马）有限公司的FLUKE

Specifications

VCHEK ^1,2,3

Range	6.000 V
	60.00 V
	600.0 V
Resolution	0.001 V
	0.01 V
	0.1 V
Accuracy	DC, 45 to 500 Hz:2.0 % + 3
	500 Hz to 1 kHz: 4.0 % + 3

Diode test ⁴

Range	2.000 V
Resolution	0.001 V
Accuracy	2.0 % + 3

Continuity⁴

Accuracy

Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer

Ω⁴

Range	600.0 Ω
	6.000 kΩ
	60.00 kΩ
Resolution	0.1 Ω
	0.001 kΩ
	0.01 kΩ
Accuracy	0.9 % + 2
	0.9 % + 1
	0.9 % + 1

Capacitance⁴

Range	1000 nF
	10.00 μF
	100.0 μF
	9999 μF
Resolution	1 nF
	0.01 μF
	0.1 μF
	1 μF
Accuracy	1.9 % + 2
	1.9 % + 2
	1.9 % + 2
	100 μF - 1000 μF: 1.9 % + 2
	> 1000 μF: 5 % + 20

Notes:
¹ All VChek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other True-RMS meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
² Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
³ Minimum measureable input in VCHEK autorange is 3 V dc. For measurements below 3 V dc, push Range button twice to get to 6 V dc manual range.
⁴ After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.

Specifications

Maximum voltage between any terminal and earth ground

600 V

Display

3 3/4-digits, 6000 counts, updates 4/sec

Operating temperature

-10 °C to 50 °C (14 °F to 122 °F)

Storage temperature

-40 °C to 60 °C (-22 °F to 140 °F)

Temperature coefficient

0.1 x (specified accuracy)/°C (< 18 °C or > 28 °C)

Operating altitude

2,000 m

Storage altitude

10,000 m

Relative humidity

	95 % to 30 °C
	75 % to 40 °C
	45 % to 50 °C

Battery type

9 Volt Alkaline, ANSI 1604A / IEC 6F22

Battery life

Alkaline: 300 hours typical, without backlight

Shock

1 Meter drop per IEC 61010-1-2001

Vibration

Per MIL-PRF-28800 for Class 2 instrument

Size (HxWxL)

167.1 mm X 85.1 mm X 46.0 mm (6.58 in X 3.35 in X 1.81 in)

Weight

13.0 oz (404 g)

Safety

Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004) and IEC/EN 61010-1 2nd Edition for measurement Category IV, 600 V, Pollution Degree 2, EMC EN61326-1

EMI regulations

Complies with FCC Part 15, Class B

Specifications

VCHEK

Input Impedance (Nominal)

~3 kΩ < 300 pF

VCHEK

Common Mode Rejection Ratio (1 kΩ Unbalanced)

> 60 dB at dc, 50 or 60 Hz

Open Circuit Test Voltage	< 2.7 V dc
Full Scale Voltage	< 0.7 V dc

Diode test

Open Circuit Test Voltage	< 2.7 V dc
Full Scale Voltage	2.000 V dc

Ω

Short Circuit Current

< 350 μA

Diode test

Short Circuit Current

< 1.0 mA

Model Name	Description
Fluke 113	Utility Multimeter

Accessory Kits
TLK-220 US	TLK-220 US SureGrip Industrial Test Lead

Cases and Holsters
C35	C35 Soft Carrying Case
C50	C50 Meter Case
TPAK	Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit includes: 9 inch hook and loop strap Universal hanger clip Hook hanger for non magnetic surfaces Strong magnet

Test Leads
TL223	TL223 Electrical Test Lead Set

您的名字 *
您的公司名字
您的邮件 *
您的联络号码 *
标题 *
信息 *
验证码 *

全名 *
邮件 *
联络电话 *
公司名字
公司地址
标题 *
我们如何可以帮助您？ *

雪兰莪,吉隆玻,新加坡 - Fluke 113 Utility Multimeter

Fluke 113 Utility Multimeter