Parameter of Walk In Chamber
| Model | MWER-42000Y |
| Inner chamber sizeW×H×D(mm) | Non-standard |
| Exterior chamber sizeW×H×D(mm) | |
| Temperature range | 0℃；-20℃；-40℃；-60℃，-70℃～+70℃（+80℃） |
| Humidity range | 30% RH～95%RH |
| Temp.Humi fluctuation | ±0.3℃；±0.5%RH |
| Temp.Humi uniformity | ±3℃；±5%RH |
| Indication Resolution | Temperature:0.01 humidity:0.1%RH |
| Heat-up and Cool-down time | Heat-up:2℃/min(Average),cool-down time 1℃/min(Average) |
| Air circulation system | Centrifugal fan air circulation system |
| Heating system | SUS＃Stainless steel high-speed heater |
| Humidification system | Electrothermal steam humidification |
| Refrigeration system | Compressor + Finned evaporator + Air(Water) cooled condenser |
| Dehumidifying system | dew point dehumidification method |
| Controlling system | Touch screen controller+SSR+PID |
| Exterior chamber material | Cold-rolled plate + Powder coating |
| Interior chamber material | SUS＃304 Stainless steel |
| Insulation material | PU +fibergalss wool |
| components | Vacuum glass observation window |
| Test hole (50mm) | |
| Control status indicator | |
| Interior light | |
| Overheat protection circuit breaker | |
| Safety protection device | Humidification system overheat protection |
| Compressor overload protection | |
| Control system overload protection | |
| Overload indicator | |
| Phase sequence protection | |
| Water shortage protection | |
| High voltage and low voltage protection | |
| Over-temperature protection | |
| Water supply delay protection | |
| Fan overcurrent protection | |
| Power supply | AC 3Ψ380V 60/50Hz Power supply can be customized |
| Customization service | Non-standard or special requirements are all welcome |
