- CH4 Gas Sensor
- Semiconductor Gas Sensor
- Outstanding anti-interference
- Anti-alcohol and anti-smoke
- Reliable service for sustainable cooperation
Semiconductor Methane Sensor FS01200A Introduction
The sensitive part of the gas sensor is sintered with nano SnO2 powder and an appropriate amount of catalyst doping. It is embedded with heating wire and metal electrodes. When trace amounts of methane gas appear in the air, the conductivity of the sensor will increase. The amount of change in conductivity increases with the concentration of methane gas, and the sensor can sense the methane concentration in the air by the magnitude of the conductivity change. FS01200A is a semiconductor-based methane sensor probe that is highly sensitive to polluting gases. It uses a multi-layer thick film manufacturing process to form a heater and a metal oxide semiconductor gas-sensitive layer on both sides of a miniature ceramic substrate, which are led out by electrode leads and packaged in a TO-5 metal shell.
Semiconductor Methane Sensor FS01200A Features
1.Detection range
Default: 300-10000PPM
2.High accuracy, high consistency, high solution, rapid response
3.Anti-alcohol and anti-smoke
4.Long service life
The lifetime is up to 2 years (in the air)
5.High detection frequency
The data updates once per second by default.
Application
1.Gas detectors, instruments and meters
2.Household, factory, commercial combustible gas leak detection equipment
3.Fire prevention and safety monitoring equipment
4.Combustible gas leak alarm
Specifications
|
Eletrical Parameter |
Technological Specification |
||
|
Package Standard |
Metal TO-05 |
||
|
Detection Gas |
Methane, Natural gas |
||
|
Detection Range |
300-10000ppm(Methane、Natural ga) |
||
|
Standard circuit |
Heating Voltage |
VH |
5.0V±0.1V ACorDC |
|
Circuit Voltage |
VC |
≤24V DC |
|
|
Load resistance |
RL |
Adjustable |
|
|
Standard Testing Condition |
Heater resistance |
RH |
55Ω±15Ω(Room Temperature) |
|
Heater power consumption |
PH |
≤350mW |
|
|
Sensing element resistance |
RS |
1KΩ-20KΩ(in 5000ppm Methane) |
|
|
Sensitivity |
S |
Rs(in air)/Rs(5000ppm Methane)≥5 |
|
|
Concentration slope |
α |
≤0.8(R5000ppm/R3000ppm Methane) |
|
|
Standard Testing Condition |
Temperature、Humidity |
20℃±2℃；65%±5%RH |
|
|
Warm-up Time |
≥48 hours |
||
|
Standard test circuit |
Vc:5.0V±0.1V； VH:5.0V±0.1V |
||
|
|
Oxygen Concentration |
21% (Not less than 18%, oxygen concentration can affect the sensor’s initial value, sensitivity, and repeatability. Consult the manufacturer before using at low oxygen concentrations). |
|
|
|
Lifetime |
10 years |
|
