LED Driver 24W IMITOS MoiSti N8080 (DC55-85V 300mA)
The IMITOS MoiSti LED Driver 24W (N8080) is a high-performance constant current power supply designed specifically for LED panel lights and downlights in Malaysia. Featuring a standard AC220-240V input and a precise 300mA output, it ensures flicker-free operation and extends the lifespan of your LED fixtures.
Full Description:
In the Malaysian climate, heat and voltage fluctuations can take a toll on lighting electronics. The IMITOS MoiSti N8080 LED Driver is engineered to act as the "heart" of your lighting system. This 24W driver converts standard household AC power into the steady DC current your LEDs need to thrive. Whether you are a homeowner performing a DIY repair or a contractor maintaining a commercial space, the N8080 offers the reliability required for 24/7 environments.
Technical Precision: DC55-85V 300mA
Unlike generic drivers, the N8080 provides a specific output range of DC55-85V with a stable 300mA current.
Easy Installation & Compatibility
The IMITOS MoiSti series is a household name in Malaysia, often found in popular LED panel series like the Feel Lite or MesaLED corrosive-resistant ranges. The N8080 features a compact form factor, making it easy to tuck into ceiling voids or lighting housings. It comes with standard wiring leads:
- Input (AC): Brown (Live) and Blue (Neutral).
- Output (DC): Dedicated connector compatible with most IMITOS 24W LED modules.
Safety and Efficiency
Safety is paramount in electrical components. The N8080 is designed for the 50/60Hz frequency standard used by TNB (Tenaga Nasional Berhad).
Why Choose Original IMITOS Replacements?
Using a 3rd-party driver with the wrong amperage (e.g., 600mA instead of 300mA) will instantly destroy your LED chips. By choosing the original IMITOS MoiSti N8080, you are guaranteed a 1:1 match in specifications, ensuring your warranty remains valid and your lights remain as bright as the day you installed them.
Safety is paramount in electrical components. The N8080 is designed for the 50/60Hz frequency standard used by TNB (Tenaga Nasional Berhad).
Why Choose Original IMITOS Replacements?
Using a 3rd-party driver with the wrong amperage (e.g., 600mA instead of 300mA) will instantly destroy your LED chips. By choosing the original IMITOS MoiSti N8080, you are guaranteed a 1:1 match in specifications, ensuring your warranty remains valid and your lights remain as bright as the day you installed them.
Specification:
-
Item No: N8080
-
Power Consumption: Driver 24W
-
Input: AC220-240V 50/60Hz
- Output: DC55-85V 300mA±5%
Q1: My LED ceiling light is flickering; is it the bulb or the driver?
A: In 90% of cases, flickering is caused by a failing LED driver like the N8080. The driver can no longer maintain a steady current, causing the LEDs to pulse. Replacing the driver usually fixes the issue.
Q2: Can I use this 24W driver for an 18W LED light?
A: No. You must match the wattage and current (mA). Using a 24W driver on an 18W light may provide too much voltage, causing the LEDs to overheat and fail.
Q3: Is the IMITOS N8080 compatible with 3-pin Malaysian plugs?
A: This is an internal driver meant for hardwiring into your ceiling's electrical point (AC220-240V). It does not use a standard 3-pin plug.
Q4: What does the 300mA±5% mean?
A: This is the constant current output. The "300mA" is the flow of electricity, and "±5%" is the precision.
Q5: How do I know if the IMITOS MoiSti N8080 fits my light?
A: Check your old driver. If it says 24W and the output is roughly DC55-85V / 300mA, the N8080 is the correct replacement.
Q6: Is this driver dimmable?
A: The standard IMITOS MoiSti N8080 is a non-dimmable driver. Using it with a dimmer switch may cause buzzing or damage.
Q7: What is the lifespan of an IMITOS LED driver?
A: Typically, these drivers are rated for 20,000 to 30,000 hours, depending on ventilation and usage environment.
Q8: Can I install this myself?
A: If you are familiar with basic home wiring (Live and Neutral), it is a simple swap. However, always turn off the main breaker first or hire a certified wireman.
A: In 90% of cases, flickering is caused by a failing LED driver like the N8080. The driver can no longer maintain a steady current, causing the LEDs to pulse. Replacing the driver usually fixes the issue.
Q2: Can I use this 24W driver for an 18W LED light?
A: No. You must match the wattage and current (mA). Using a 24W driver on an 18W light may provide too much voltage, causing the LEDs to overheat and fail.
Q3: Is the IMITOS N8080 compatible with 3-pin Malaysian plugs?
A: This is an internal driver meant for hardwiring into your ceiling's electrical point (AC220-240V). It does not use a standard 3-pin plug.
Q4: What does the 300mA±5% mean?
A: This is the constant current output. The "300mA" is the flow of electricity, and "±5%" is the precision.
Q5: How do I know if the IMITOS MoiSti N8080 fits my light?
A: Check your old driver. If it says 24W and the output is roughly DC55-85V / 300mA, the N8080 is the correct replacement.
Q6: Is this driver dimmable?
A: The standard IMITOS MoiSti N8080 is a non-dimmable driver. Using it with a dimmer switch may cause buzzing or damage.
Q7: What is the lifespan of an IMITOS LED driver?
A: Typically, these drivers are rated for 20,000 to 30,000 hours, depending on ventilation and usage environment.
Q8: Can I install this myself?
A: If you are familiar with basic home wiring (Live and Neutral), it is a simple swap. However, always turn off the main breaker first or hire a certified wireman.
