The Phased Array low profile crawler LPS-01 and LPS-02 are compatible with Phased Array ultrasonic flaw detector, which is used to perform circumferential weld inspection on small diameter pipe
●Compact, lightweight, portable, waterproof and rust-free.
●Probes and wedges can be quickly and easily changed.
●Support up to two phased array probes to cover the whole welds at one time.
●Covers standard pipes with outside diameters ranging from 20.32-114.3mm (0.84-4.5 inch).
●Can be operated within 15mm clearance, perfect for hard-to-reach area inspection.
●Encoder precision: 32.6step/mm
●The probe spacing can be adjusted in the range of 0-55 mm.
●Crawler can provide stable and constant pressure around the pipe full circumference.
●Urethane wheels help the crawler have smooth radial movement along the pipe and reduce axial drift.
●Positive inspection and reverse inspection with high reproducibility and good coupling.
●With its simple buckle design, just easily buckle up and unbuckle the links for different pipe diameters (No need to disassemble the whole scanner).
●Two inspection methods: one-side inspection and dual-side inspection
.png)
Crawler for Small Pipe Welds
Configuration
Typical configuration for dual-side inspection: LPS-02 crawler, two R35E phased array probes with 60°refraction angle AOD wedges, Y splitter, SIUI phased array flaw detector and manual irrigation device
US 1153 
CN 160 
AP 128 
MY 86 
AU 45 
GB 35 
CA 32 
NZ 30 
