Video

Kategori Mengikut Lamello

Kategori Mengikut Lamello

Kategori Mengikut Lamello

Kategori Mengikut Lamello

Kategori Mengikut Lamello

Kategori Mengikut Lamello

Invis Mx is the unique connection that satisfies the highest demands for aesthetics, stability and productivity. With no visible openings, Invis Mx can be quickly detached and reconnected at any time via its magnet drive. The Invis Mx connectors and studs are quickly and easily screwed into prepared 12 mm drill holes using a cordless drill. The MiniMag is then fixed to the cordless drill and rotated on the surface to close the connection with a clamping force of up to 250 kg per connector. Kategori Mengikut Lamello

Clamex P-14 Flexus is a detachable connection fitting based on the P-System anchorage and is connected via a lever. Clamex P-14 Flexus therefore offers all the existing advantages of the P-System. These include quick, tool-free installation, lateral tolerance, twist prevention and stackability. What distinguishes the Clamex P-14 Flexus from the Clamex P-14, are the flexible positioning pins. Thanks to the flexible positioning pins, no rigid elements of the connector protrude. This new feature allows the subsequent installation of workpieces into existing elements and therefore simplifies the assembly sequence considerably. The positioning pins serve as a positioning as well as fixing element for the workpieces. Fixed shelves are therefore kept in place, while the workpieces are tightened using the hex key. The double-sided bevel of the positioning pins allows the workpiece to be detached again. The positioning pins are easily inserted into the female half-shell, also enabling elements with 90°miters to be installed with no problem at all. Kategori Mengikut Lamello

The Cabineo is a one-piece cabinet unit fitting and is installed into a drilled or routed shape. No edge drilling is necessary - the machining happens solely in the surface. Due to this, Cabineo can be used with all kinds of CNC machines, including very simple 3 axis and nesting machines. In comparison with the standard cam and dowel fitting, the Cabineo offers more efficient production, faster installation and a higher clamping force. To top it off, there is no need for wooden dowels. The concept of the fitting was designed to use a minimal amount of resources for a maximum of functionality. The Cabineo offers considerate advantages in the whole process, including production, transport and installation. Installing the fitting into the workpieces and stacking them during the production process is possible without any protruding parts, which could damage the finished surfaces. This eliminates the packing of bags with fittings which would need to be delivered to the job site for installation. Because the elements are already factory-installed, the person assembling doesn't need to handle loose fittings supplied in a bag during installation. This speeds up the assembly considerably and additionaly helps in reducing possible mistakes. The fitting is inserted into the routed shape on the surface. This can take place in production prior to transport or following transport at the final destination. The preinstalled screw inside the fitting is then screwed into the 5mm drill hole in the corresponding workpiece, using a ball-end allen key. The speed of the cordless drill joins the workpieces quickly and powerfully. Cover caps in various colours are also available and can be clipped onto the Cabineo within seconds. The time-saving one-piece Cabineo furniture connector, is now also available with black housing. When used in dark materials, the Cabineo black fuses with the background, so that no additional cover caps are necessary. Areas of application are kitchens with black or anthracite-coloured interior cabinets, dark walk-in-wardrobes in private and public areas or restaurant furnishings. The Cabineo black is also ideal for shop fitting where dark materials are often used, whether in the clothing market or in the food sector e.g. wine exhibitions or vegetable displays. Kategori Mengikut Lamello

Joining with the Invis Mx2 System, the contact free, magnet-driven connection. Invis Mx2 is an invisible and detachable joining system for wood. Learn in this video how this revolutionary system works. Kategori Mengikut Lamello

Completely invisible and detachable within seconds. With no visible openings, Invis Mx2 can be quickly detached and reconnected at any time via its magnet drive. The Invis Mx2 connectors and studs are quickly and easily screwed into prepared 12 mm drill holes using a cordless drill. The closed connection has a clamping force of up to 250 kg per connector. This also pleases artistic gymnast and Lamello carpenter Janick Brunner, who demonstrates his skills on custom-made parallel bars. �8�8�8 Kategori Mengikut Lamello

The Organisation romande pour l’intégration et la formation professionnelle (ORIF) has been present in Valais for over 50 years. It offers young people who need support on their way into working life a real bridge to the future. ORIF provides training in 15 different professions and supports around 160 to 170 young people each year in specialised workshops. Carpentry is a particularly important area. In this video, Yann Savioz, a social education trainer and passionate master carpenter, explains how Lamello products support him in his work. His curiosity for innovation led him to the Lamello LC P-16, a revolutionary solution for joining lightweight panels. The LC P-16 impresses with: Quick and easy processing Precise joints without concealed timber edges or glue Time and material savings Use in furniture construction, interior fitting and caravans Learn more about the advantages of the LC P-16 and how it is changing the work in carpentry. #lamello #lamellostories #lcp16 #orif #lightweightpanels #carpentry #furnitureconstruction #interiorfitting #caravan #lamellomalaysia Kategori Mengikut Lamello

The Clamex P-14 CNC is a detachable connector based on the P-System anchorage and is connected via a lever. This means the Clamex P-14 CNC has all the advantages currently offered by the P-System. These include quick, tool-free installation, lateral tolerance, is twist-free and is stackable. In contrast to the design of the Zeta P2 power tool, using the Clamex P-14 CNC means the workpieces are already aligned during assembly. The connector is then centered on the access hole. This precise alignment allows you to choose between a 6mm access hole for caps or a 5mm hole without a cap. This is achieved by precise CNC machining. There is no need for additional alignment with dowels.

#lamellomalaysia
  Kategori Mengikut Lamello

With the Divario shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the components during insertion, creating clean tight joints. The clamping action only occurs at certain points rather than across the entire insertion length, making the components easier to insert. Due to the strong connection between the work pieces, the joint is able to carry high tensile forces. With this new fitting the user has greater flexibility in design without having to forgo stability.

#lamellomalaysia #carpantry #woodwork #asthetic  Kategori Mengikut Lamello

Clamex P Medius complements the Clamex P-14 connecting fittings for use in shelf units where two shelves meet the dividing panel at the same height. The dividing panel connection Clamex P Medius consists of two parts with different installation depths. The lever part is installed in the shelf, anchored in a 14 mm deep P-System groove. Thanks to its installation depth of just 10 mm and crescent-shaped cut out, the second part can be fitted back-to-back in a dividing panel measuring just 16 mm.

#lamellomalaysia #carpantry #woodwork #furniture #swissmade #worldclass Kategori Mengikut Lamello

Bisco P is a plastic element and part of the P-System range of connecting fittings. The aligning element fits into the 7 mm wide P-System groove but is not form-locking like Clamex P. Instead, it is anchored in the groove due to its surface structure and can also be used as a fixed connection with PVA glue. Bisco P-14 / Bisco P-10 is used in combination with Clamex P-14, Tenso P-14 or Clamex P-10 as a cost-effective solution when clamping force is only required from every second fitting and the use of more affordable aligning elements in between to maintain flush grooves is sufficient as an alternative.

#lamellomalaysia #woodwork #furniture #carpantry #worldclass #bestsia #swissmade Kategori Mengikut Lamello

Zeta P2 - The machine for the evolving P-System, saving you time daily The Zeta P2 is the profile biscuit joiner for P-System anchorage, and the Clamex P connector range in particular, and is used to connect wood materials. The integrated vertical mechanical drive on the cutting spindle of the Zeta P2 is the centre-piece of this profile biscuit joiner. During the cutting process, the vertical mechanical drive automatically performs a vertical movement to create the profile groove. All P-System fittings are then manually inserted into this groove, ensuring a fast form-locking anchorage.
The Zeta P2 can cut P-System grooves for connecting fittings with varying installation depths simply by turning the P-System depth adjuster, thus removing the need to change cutters. The vertical movement for the profile groove is triggered automatically when the maximum cutting depth is reached and requires just a fraction of a second. The vertical mechanical drive combines process security and reliability with a low-wear, fully mechanical construction. The Zeta P2 can also be employed as a standard biscuit joiner for original biscuits by simply deactivating the profile groove function and changing to a 4mm blade.
#lamellomalaysia #swissmade #worldclass #woodwork #furniture #bestasia 
  Kategori Mengikut Lamello

P-System - Form-locking anchorage without tools

#lamellomalaysia #carpantry #woodwork #furniture #bestasia  Kategori Mengikut Lamello

Clamex P-14 - Detachable furniture connector Clamex P-14 is a detachable furniture fitting on the basis of the P-System anchorage and is connected with a lever. The form-locking P-System anchorage allows for an exceptionally fast and powerful anchorage in the work piece without tools. Clamex P needs neither glue nor screw, providing the woodworker with uncountable advantages in the production process and in the differentiation from standard furniture fittings. For example, Clamex P can serve to join either detachable or glued furniture mitres. The small 6 mm openings for hexagonal keys make the fitting unique and differentiate Clamex P from standard furniture fittings.

#lamellomalaysia #asiabest #furniture #carpantry #woodwork Kategori Mengikut Lamello

Tenso P-14 - Self-clamping connector as gluing aid for all angles The Tenso P-14 is a self-clamping connector with three functions: alignment, clamping and connecting. The very high level of clamping force allows work pieces to be glued without the need for screw clamps or pressure. Based on the innovative P-System profile groove from Lamello, the connector also facilitates strong anchorage in the work piece in just seconds without the need for tools. The two-part concealed connector meets the requirements for the implementation of a completely new connection process in interior fitting. It is an innovative connection method that facilitates an unprecedented level of flexibility, speed and simplicity throughout the entire design, production, transport and assembly process. Although the connector boasts excellent tightening force, this version is intended for use as a gluing aid. The additional option of preloading the connector prior to glue applications now enables use for all angles and mitres. The individual preloading of the joining elements considerably reduces the required amount of force when connecting the workpieces, which is another benefit to the user. With the option to install the connector offset (surface 10 mm, edge 18 mm) it is possible to use the Tenso already from 13 mm panel thickness or for dividers from 19mm.

#lamellomalaysia#bestasia #woodwork #furniture Kategori Mengikut Lamello

The Tenso P-10 is a unique gluing aid, which eliminates the need for clamps or presses. Developed for mitres (45°) from a material thickness of 15 mm or butt joints (90°) from a panel thickness of 12 mm, the Tenso P-10 is ideal for glued furniture, e.g. bathroom furniture, sideboards, small shelve units, door frames, claddings, false edges, frames, etc.

#lamellomalaysia #bestasia #furniture #woodwork Kategori Mengikut Lamello

Joining with Clamex P-14 – 45° mitre joint. How to machine 45° mitre joints with Zeta P2. Clamex P-14 is a detachable furniture fitting for panels from 16mm and larger.

#lamellomalaysia #woodwork #furniture #worldclass #swissmade #asia Kategori Mengikut Lamello

Clamex P-14 – learn in this video how to machine a non mitred joint with Zeta P2. Clamex P-14 is a detachable furniture fitting for panels from 16mm and larger.

#lamellomalaysia #asia #worldclass #swissmade #woodwork #furniture Kategori Mengikut Lamello

Zeta P2: the power tool for all P-System fittings in various sizes. The Zeta P2 is the profile biscuit joiner for P-System anchorage, and the Clamex P connector range in particular, and is used to connect wood materials.

• For the fast, form-locking anchorage of all P-System connectors in all angles
• The automatic vertical movement creates a profile groove enabling insertion of the connectors by hand
• Fast, easy and precise working with the well-known Lamello system

#lamellomalaysia #asia #woodwork #furniture #swissmade #worldclass Kategori Mengikut Lamello

Do you have the feeling that your P-System connectors aren't working like they normally do? Check the milling depth and readjust the Zeta P2 if necessary. We show you how it works in this video.

#lamellomalaysia #woodwork #furniture #worldclass #swissmade Kategori Mengikut Lamello

There are various possibilities for machining the P-System groove using a CNC machine. The profile groove can be placed in the edge as well as in the surface. This can be done either with a CNC groove cutter or alternatively with a CNC shaft tool.

#lamellomalaysia #woodwork #furniture #worldclass #bestasia #art Kategori Mengikut Lamello

Hirschi Carpentry, based in the Emmental, is synonymous with precision craftsmanship, sustainable timber construction and regional value creation. Whether for new builds or renovations – when manufacturing roof window casings, the team consistently relies on Lamello’s joining solutions. A key element in this is the Clamex P-14. In day-to-day carpentry work, it ensures precise, tight miter connections and significantly reduces the time required for production. Recently, the Tenso P-14 has also been introduced, which enables powerful preloading and thus provides the ideal glue aid. This results in precisely fitting components that can be installed on site without any reworking. In this video, carpenter Sven Wicki demonstrates how the Clamex P-14 and Tenso P-14 support him in his work and why he would no longer want to do without this joining technology. The systems really come into their own, particularly with custom roof geometries where every miter must be precisely adjusted.
Clamex P-14:
Removable furniture connector, installed in seconds
Aesthetic appearance with a barely visible 6 mm access hole
All-rounder for all angle and miter connections from 22.5° to 180°
High clamping force for perfectly tight joints
Ideal for open shelf units, cupboards or wardrobes under sloping ceilings

Tenso P-14:
Self-clamping connector for gluing, installed in seconds
Invisible joints for maximum aesthetics
Pre-tensioning function, ideal for miters and joining situations from 22.5° to 180°
High clamping force for perfectly clamped joints without screw clamps or protectors
Glue aid for a wide range of applications in furniture making or interior fitting In combination with the Zeta P2, the team remains flexible at all times and can continue working directly without the need for complex jigs, templates or clamps. Watch the video to find out how Hirschi Carpentry ensures efficient processes and the highest quality in timber construction through well-planned prefabrication, modern joining technology and extensive experience.

#lamellomalaysia #art #swissmade #woodwork #furniture #best Kategori Mengikut Lamello