For use in injection moulding where parts need to be printed after manufacture and silicone mould release agents are therefore not suitable.
Application
Spanjaard Mould Release (Non-Silicone) forms a heat-resistant wet film on the mould and can easily be removed by common solvents if necessary.
Spanjaard Mould Release (Non-Silicone) does not contain silicones or PTFE.
Applictions Instruction
- Shake can vigorously before use.
Typical Properties
TYPICAL PROPERTIES | SPANJAARD MOULD RELEASE (NON-SILICON) |
Colour | White |
Density | 1.28 g/ml |
Viscosity, cSt @40°C | 46 |
Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei