10 PAIRS CONNECTION MODULE

* Catogory: Telephone Accesorries

* Internal diameter of connection wire 0.4-0.65mm

* DImension: 21mmX40mmX124mm

* Wieght: 45g

Introduction

The IDC Module termination system provides an equivalent, reliable high performance connection, circuit isolation with quick and easy patching and testing. It is designed for use on existing equipment, providing a cost effective alternative supply solution. The modules have an extensive range of accessories for cable management, protection and testing.

Features

• Contact Technique

• Highly reliable insulation displacement contact

• Quick and easy to use

• Commercially attractive

• Can be installed to existing industry standard backmount frames

• Gas tight connection

• Two wires per contact

• Individual pair disconnection structure

• Protection facility

• Test and patch facility

The wire is pressed by the wire insertion tool into the contactor slot, which cuts through the conductor insulation. The displacement of the insulation and constant torsional restoring force of the contactor arms, forms a permanent gas tight contact with the contactor. The clamping ribs act as a strain relief on both sides of the conductor ensuring mechanical integrity of the connection. The wire insertion tool terminates the wire and trims it to the correct length. The IDC Modules consist of two rows of contacts, one for permanent wiring, and the other for jumper wires. The modules are available in three forms, Disconnection, Connection and TRC Earth modules.